Water Environment Federation (WEF) Discussion ForumsWater Environment Federation (WEF) Discussion Forumshttp://www.wef.org/TechnicalDiscussions/jfuller@wef.orgTue, 13 May 2008 22:37:19 GMT20http://www.wef.org/TechnicalDiscussions/Topic8315-11-1.aspxJerry, </P><P>Thanks for your sensible advice. I will get in touch with S &amp; L as you suggest. </P><P>I did manage to get a simple layout of the Smith &amp; Loveless sewage lift station from the US Patent Office.</P><P>Many thanks</P><P>George RSun, 17 Feb 2008 16:27:29 GMTGeorge Rhttp://www.wef.org/TechnicalDiscussions/Topic8315-11-1.aspxI went directly to Smith and Loveless via the internet and they had, suprisingly, an old print that I needed. Sun, 10 Feb 2008 11:15:31 GMTJerryhttp://www.wef.org/TechnicalDiscussions/Topic8315-11-1.aspxI'm looking for any drawings that might exist to help me modify an old Smith and Loveless sewage lift station. </P><P>The plan is to change the wet well dry well station to a submersible station to eliminate the need for confined space entry. However, I do not have any record drawings and wondered since there must be many of these around whether anyone has a set of typical drawings.</P><P>This pump station is probably around 40-50 years old and has already had the ejectors replaced with dry well submersibles. </P><P>The name plate shows it was made under licence by Air Products Ltd who were based in Wrexham Wales. Sat, 09 Feb 2008 09:52:09 GMTGeorge R