June 2007, Vol. 19, No.6

Products

Chlorine Meter
The ExStik® Total Residual Chlorine Meter, Model CL200, now has a new offset adjustment feature. The CL200 reading in parts per million can now be precisely adjusted to match the value of a known standard or to agree with previously established references. The meter provides a direct reading of total chlorine from 0.01 to 10.00 ppm quickly, and eliminates the need to store and transport a sample solution back to the lab for analysis. The large LCD simultaneously displays both chlorine and temperature readings, and includes an analog bar graph to observe changes in solution. Extech Instruments (Waltham, Mass.). www.extech.com

Titrator
The AQUACOUNTER® COM-300A Automatic Titrator performs pH, acid–base, complexometric, redox, Karl Fischer, photometric, nonaqueous titrations and ion-selective electrode measurements. The unit also can determine total acid and total base in oils and P and M (relating to water hardness) alkalinity. Additional features include one-touch calculations with a statistics package and more than 30 files of built-in method memory. This titrator includes free downloadable software and an RS-232 cable. JM Science (Grand Island, N.Y.). www.jmscience.com

Butterfly Valve
The Type 567 Butterfly Valve comes in large-diameter sizes up to 12 in. The valve incorporates a double eccentric operating principle that provides improved wear and easier operation. The valve’s off-center shaft allows the disc to completely disengage from the disc seal, even when partially open. This reduces seal friction and improves seal wear characteristics. The Type 567 also features a specially engineered body seal with a Q-shaped O-ring that eliminates the need for flat gaskets and is compatible with any flange adaptor design, including those with serrated faces. The inner body, discs, and bearings are available in a variety of materials. GF Piping Systems (Tustin, Calif.). www.gfpiping.com

Data Logger
The compact design of the DW-USB Series data loggers enables the user to monitor temperature, humidity, dewpoint, voltage, or current almost anywhere. The user can select the sampling rate, start time, high–low alarm settings, and temperature unit parameters with a Windows®-based operating system. Alarm status and low battery are indicated via flashing LEDs. When the protective cap is fitted, the data logger resists moisture to IP67 standards. The factory-supplied 3.6-V lithium battery typically allows for 1 year of logging. Dwyer Instruments Inc. (Michigan City, Ind.). www.dwyer-inst.com

Flowmeter
The ST50 Remote Mount Flow Meter features a no-moving-parts thermal mass flow sensor design and measures airflow from 1 to 125 SFPS (0.3 to 38 NMPS), nitrogen from 1 to 150 SFPS (0.3 to 46 NMPS), and compressed air from 4 to 400 SFPS (1.2 to 122 NMPS). Accuracy is +1% of reading, +0.5% of full scale, with repeatability of +0.5% of reading. It operates at temperatures from 4°C to 38°C (40°F to 100°F). Fluid Components International (San Marcos, Calif.). www.fluidcomponents.com

Signal Converter
The IFC100 signal converter is designed to offer precise diagnostics of product, application, and instrumentation. It can measure electrode resistance and electrode noise for the volumetric indication of gas bubbles, solid particles, and chemical resistance. Coil resistance is monitored to assess magnetic-field quality and flowmeter temperature. The IFC 100 features a metal enclosure, a backlit display, and a push-button soft keypad. It also can be rotated in 90-degree increments. Krohne (Duisburg, Germany). www.KROHNE.com

Rotation Switch
The Rotation Switch Series for level-sensing of low-density and potentially explosive powders uses a rotating vane as a sensor to detect the level of a dust or powdered material. The vane is turned slowly by a brushless synchronous motor. As long as the level of the powder remains below the vane, the vane is free to turn. If the powder rises to the level of the vane, this stops the rotation. A switch turns off the synchronous motor and produces an output for an external control system. The switch can be used for powdered materials with low densities (more than 100 g/L). Hawk Measurement Systems (Phoenix). www.hawkmeasure.com

Preassembled Blower Package
The EasyAir X2 is a compact, preassembled, skid-mounted blower unit with all piping, valves, and instrumentation in place. Produced for both vacuum and pressure applications, the new package features a powder-coated noise enclosure plus easy access for service and maintenance. The package is available with a wide range of optional equipment and can be specifically designed to meet customer requirements. Dresser ROOTS (Houston). www.rootsblower.com


Spiral-Wound Membrane System
The MegaMagnum® Water Treatment System uses 18-in.-diameter spiral-wound reverse-osmosis elements. It is designed to reduce the cost, footprint, and installation time of municipal and industrial water treatment systems. The system is available in four configurations, with nominal flow capacity ranging from 0.5 to 2.0 mgd. The standard package includes flowmeters, pressure transmitters, a conductivity meter, a variable-frequency drive, and a human–machine interface with touch screen, data trending, and Ethernet access. Optional equipment includes systems for antiscalant dosing, acid dosing, chlorine monitoring, and clean-in-place. Koch Membrane Systems Inc. (Wilmington, Mass.).
www.kochmembrane.com

Mixer
The 4460 “banana” blade mixer features an 8.4-hp drive. Motors are high-quality squirrel-cage design using Class H insulation applied by trickle impregnation for a winding fill of more than 95%. High efficiency, in-line, parallel helical reducers are used. These reducers have a minimum service factor of 1.5, and the designs meet both AGMA and ISO requirements. Motor and reducer housings are made of ASTM A48-76 cast iron. Several coatings are available to meet the requirements of different applications. The fiberglass-reinforced polyurethane blades feature a swept-back design to allow rags and stringy material to slide off and leave the blades clear. ITT Flygt USA (Trumbull, Conn.). www.flygtus.com

Modeling Software
Version 9.0 of InfoWorks includes enhancements to four products: InfoWorks CS for wastewater management and sewerage provision; SD for stormwater; WS for water distribution and supply; and RS for river, channel, and floodplain flows. Improvements include the ability to model 2-D flows and to export models and results to Google Earth format for sharing across the Internet. This version is designed to provide greater accuracy in the simulation of flow behavior, particularly in areas of complex geometry.
Wallingford Software (Oxfordshire, England). www.wallingfordsoftware.com

Variable-Frequency Drives
The VLT® Series variable-frequency drives are now available with power through 1350 hp in 460 and 690 VAC. F1 frame models deliver power up to 1050 hp in an 86.8-in. × 55.1-in. × 23.9-in. footprint, while F2 frame models deliver up to 1350 hp in an 86.8-in. × 71.0-in. × 23.9-in. footprint. These drives also feature a unique cooling design that uses a ducted back channel to pass cooling air over heat sinks with minimal air passing through the electronics area. This enables 85% of the heat losses to be exhausted directly outside the enclosure. Several power, monitoring, enclosure, filtering, control, and convenience options and accessories are available. Danfoss Drives (Milwaukee). www.danfossdrives.com

Pipe Exposure Tool
The new pipe exposure tool (PET) is suitable for all diameters of ProFuse pipe. It consists of a plastic body with a fitted hardened-steel blade. The PET enables the skin layer on the ProFuse pipe system to be cut without damaging the inner core pipe. Once cut using the tool, the skin is then peeled away from the pipe, leaving a clean surface for joints and connections. Uponor (Leeds, England). www.uponor.co.uk

Peristaltic Pump
The 520RE peristaltic pump for chemical injection applications is designed for use in applications requiring accurate metering, dosing, and transferring of harsh chemicals, including sodium hypochlorite, ferric chloride, sodium bisulfite, fluoride, carbon and lime slurries, polymers, aqueous ammonia, potassium permanganate, and caustic slurries. It offers flows from 5 gal/h at 30 psi to 7 gal/h at 100 psi. It features a shade guard that is sealed to withhold any spillages at atmospheric pressure. Drain-port plugs enable easy removal of spilled fluid, and an optional float-switch leak detector will stop the pump automatically in such conditions. Watson-Marlow Bredel (Cornwell, England). www.watson-marlow.com

Chlorine-Gas Arrestor
The Capital Controls® Type VEGA™ is a disposable chlorinator-vacuum regular-vent gas arrestor designed to treat occasional chlorine-gas vent releases that normally accompany chlorine-container changeovers. The field-tested VEGA is designed to prevent nuisance tripping of chlorine-room air-sensor alarms; help in compliance with local, state, and federal code restrictions against exhausting chlorine fumes outside of a building; and keep buildings free from chlorine-related acid corrosion. The 19-L disposable container of chemically impregnated media is designed to react on contact to convert chlorine to harmless landfill-disposable salt. It is equipped with inlet and outlet chlorine colorimetric indicator strips. Exposure to chlorine will turn the white strips yellow. Under normal operating conditions, the system has an operating life of approximately 1 year. Once exhausted, the entire system can be disposed of in a nonhazardous landfill. Severn Trent Services (Fort Washington, Pa.). www.severntrentservices.com