WEF Discussions — Now on LinkedIn!

WEF is pleased to announce the creation of free LinkedIn groups associated with its technical discussion forum topics. Through these LinkedIn groups, members will be able to view and participate in discussions, as well as communicate with one another via direct messages. Share your experiences and knowledge, ask questions and respond to other discussions as frequently as you like!

You must have a LinkedIn profile to join a LinkedIn group; you can create your profile here. If you already have a LinkedIn profile, all you need to do is submit a request to join one or all of the following groups:

Water Environment Federation (Main) | Biosolids | Collection Systems | Nutrients | Stormwater 
Utility Management | Water Reuse | Water for Jobs | Watershed Management | Laboratory Practices 

RSS Feed Print
Overheating wires with WEDECO UV system
01453718
Posted: Tuesday, August 7, 2012 2:46 PM
Joined: 9/24/2009
Posts: 1


We are experiencing some reoccuring problems with wiring failure in the conduits of our WEDECO UV system.  The wiring is failing and is believed to be a result of excessive heat.

 

Their is a fair amount of finger pointing between WEDECO and the design engineer.

 

Has anyone experienced overheating/wire melting in conduits with the WEDECO system??

 

Charlie Logue

Renewable Water Resources

Greenville, SC


17633991
Posted: Sunday, April 14, 2013 6:44 PM
Joined: 2/9/2013
Posts: 3


Charlie,

Are you speaking of the wires in the conduit supplying voltage to the UV system from the control panel?  Have you taken and amp reading under load and verified the wire gauge is correct for the voltage?